You can use 'CBROM32.EXE' to change P4SCi's LOGO. First, copy the utility (cbrom32) + BIOS file name (e.g. P4SCi.bin) + your logo.bmp (must be.

This page describes how to change the full screen boot logo of the Award BIOS for Robin and Woodpecker modules. For changing the boot logo, the CBROM.EXE is needed.

Zuken software. Download a free student version of E3 Series software and get those school projects completed in a fraction of the time it would take you with AutoCAD. Electrical & Wire Harness Design E3.series: Electrical Wiring, Control systems and Fluid Engineering Software. E3.series is a Windows-based, scalable, easy-to-learn system for the design of wiring and control systems, hydraulics and pneumatics. To improve the quality of its electrical documents such as wiring diagrams,and to raise its design efficiency, Bruker AXS GmbH Karlsruhe implemented Zuken’s E3.series at all stages. The manufacturer of X-ray analysis systems uses E3.series from concept and production to service.

This tool is provided by Phoenix Technologies and Toradex is not allowed to send a copy to the customers. Please contact the Toradex support for more information. The update of the boot logo is a fundamental change in the BIOS image. If the modification is not done correctly, the board might not boot anymore. Use a baseboard with a second BIOS image for recovering corrupted BIOS images. If you do not have such a baseboard, be aware of the risk.

The boot logo modification is on your own risk. For customer that want avoid the risk or do not have the CBROM.EXE tool, Toradex offer the service of changing boot logos for the fee of support hours. If you are interested, please contact the Toradex support team. The current boot logos can be extracted from the bios image by using the following commands whereas the R0P91016.bin is the name of the BIOS image: cbrom R0P91016.bin /jpeg extract cbrom R0P91016.bin /jpeg1 extract cbrom R0P91016.bin /jpeg2 extract The new boot logo has to be provided in 3 resolutions: 1024x768 (jpeg), 800x600 (jpeg1) and 640x480 (jpeg2).

The BIOS will pick the correct resolution based on which video mode is supported. If you provide not enough memory (selectable in BIOS setup menu), the highest modes will fail and the BIOS will try a lower video mode. There must be 3 logos since the BIOS can hang if you want to force a video mode (e.g.

1024x768) while the video BIOS is not able to switch that mode. The files must be 24 bit color and the file size must be small (.

The Small Article Using CBROMxxx(AWARD Only) The CBROM Discussion thread is CBROM2xx is to be used in the DOS 'Real Mode', which means a Win98 Boot disk is required. I successfully use the 'Command Prompt' of Win2000, as CBROM32 will only work in the 'Command Prompt' of Win98, Win2K, and XP. This is CBROM v1.40 and newer. CBROMxxx allows you to change: 1) Extract ROM Modules(Extract).

2) Delete ROM Modules(Release). 3) Insert ROM Modules(ROMFile). CBROM32 will fix the BIOS checksum when inserting a module, but it will not fix the checksum of the module. Not all modules require a checksum.

If the un-zipped BIOS file does not have a '.bin' extension, you can simply edit the file name to end in.bin, but it's not necessary. If a ROM module type being operated on has more then in the BIOS, a prompt will appear for you to chose the desired one. The latest CBROMxxx versions that work for the latest AWARD BIOS, are linked here: Be aware that CBROM 1.40, and newer, are all Win32 programs and do not work in pure, real mode DOS, only a Command Prompt Window. The command set can be displayed using the /?

Switch: The ROMs contained in the BIOS can be displayed using the /D switch: CBROM32_140 has a slightly different command set as this screen shot shows: Anyhow, the last few versions all work the same. So operating on a module like '_EN_CODE.BIN' with CBROM32, the switch to use is /group. Execute at the command prompt the following, depending on what your doing: Delete rom or 'release': cbrom32 xxxx.bin /group release Extract rom: cbrom32 xxxx.bin /group extract Add rom: cbrom32 xxxx.bin /group _EN_CODE.BIN When adding a module to a BIOS, CBROM generates a file called 'bios.rom'. That is the added module in compressed form.